1.3 Using the Touch Panel Display17Knowing Your Copier● Each feature is at factory setting. This default setting can be changed in the Tools Mode. For details, refer to “8.3 Setting ToolsMode”.■ Copier Screen● Message areaDisplays messages like machine status and operation guide.● TabSelect by touching the various tabs like Basic Features, Added Features, Image Quality, Output Format,and Others to display their corresponding screens.● Stored Job Templates buttonTouch this button to display the Stored Job Templates screen.● Document countDisplays the number of documents being scanned.● The maximum number of originals that can be scanned is 1,000 (A4-sized) sheets. However, depending on the document size,error messages may appear on the display before the number of documents reaches 1,000 sheets.● No. of copiesIndicates the number of sets of copies to make. Enter a value by using the keypad. You can set a valuebetween 1 to 9,999. To reset the value to “1”, press the C button.● Selection buttonsOnce touched, the button will be highlighted.“...” indicates that there are more setting screens following.TabMessage AreaNumber of copiesStored Job Templates buttonSelection buttonDocument Count
