110Making Copies AddedFeaturesBasicFeaturesImageQuality Stored JobTemplatesOutputFormat5.9 Loading Documents inBatchesThis feature allows you to load documents in batches for copying with the same settings. You can load yourdocuments either on the document glass or in the DADF.When Next Original is selected on the screen that is displayed while scanning documents loaded in theDADF, the documents will be scanned continuously even if Off is selected for HighDocVol.Up to 50 sheets of documents can be loaded in the DADF at one time. If you have more than 50 sheets ofdocuments, divide them into batches for loading.This section explains how to load your documents in batches in the DADF. Options available for this featureare:OffOnly one batch of document is used for copying.OnTo load documents in batches for copying.● You cannot load documents both on the document glass and in the DADF. If you used the document glass for the first batch ofdocuments, load the other batches on the document glass as well. The same goes for using the DADF.● Up to 1,000 pages of A4-sized pages can be loaded. However, depending on the document size, error messages may appearbefore 1,000 pages are scanned. The same goes for selecting the High Document Volume feature during interrupt copying.● The feature is set to Off at shipping from the factory.● The factory setting can be changed on the system administrator screen. For the setting change procedure, see “8.1 SystemAdministrator Mode”.● A Screen will not be displayed during scanning if you load one set of documents without specifying any image feature andsetting HighDocVol to On.Procedure1 Load the documents.If you are using the DADF, do not load more than 50 sheets.2 Select HighDocVol on the Basic Features screen.The High Document Volume feature changes to On.High Document Volume“3.2 Loading Documents”● To cancel the High DocumentVolume feature, select HighDocVolagain.
