5.32 Copying Documents of Different Settings (Build Job)184Making Copies4 Select Start.The screen to build the job appears.The example used in this explanation assumes that Annotation, Covers,Separators, and Output/Finishing options are not selected.5 Specify settings for copying.To cancel the current selections:When you press Clear All, the screen for canceling settings is displayed.Follow the instructions displayed on the screen.6 Press Start on the control panel.The scanning of documents for copying will begin.Once the scanning is completed, the display will return to the Build Job screen.● In Build Job mode, Collated andUncollated cannot be selected.● You can use registered settings ofStored Job Templates for Build Job.However, the setting of Build Jobcannot be programmed in thememory.● Settings for documents that havebeen scanned for copying cannot bechanged.
