8.1 System Administrator Mode289System Administrator Mode SettingsAfter a while, the following screen is displayed and operation is switched fromthe main control panel to the copier control panel.4 Lift the cover of the copiercontrol panel to start usingthe panel.Switching to the copier control panel is complete.●8.1.2 Entering/Exiting Tools ModeThe following procedure explains how to enter or exit the Tools Mode.After switching from the main control panel to the copier control panel, you can start to use the ToolsMode.In Tools Mode, you can change the default settings of the features displayed, or change the imagequality and the machine setting status.You need to enter the Tools password in order to access Tools Mode.● You cannot switch to Tools Mode if there is an error message shown on the display. Check that “Ready to copy”, “Please wait...”or the Auditron Administrator Password Entry screen is displayed.● The factory setting of the Tools password is 11111. This password can be changed. For security reasons, change this passwordas soon as possible. For details, refer to “8.3.2 Changing Tools Password”.● Select Back to exit the SystemAdministrator Mode.
