6Knowing Your Copier1.2 Switching On/Off PowerSwitch on the power of the copier before you begin copying. The server will then start automatically.After the power is on, the machine will take about 7 minutes (for 100 V model) or 6 minutes (for 200 V, 220-240V models) to warm up before you can start making copies. Switch off the power of the copier at the end of theday, or when it will not be used for a long time. You can make use of the Power Saver feature if the copier is tobe left idle for a while. The Power Saver feature reduces the power consumption of the machine, therebyhelping to conserve energy.“1.2.2 Saving Energy”1.2.1 Switching On/Off Power■ Switching on powerProcedure1 Turn the power switch tothe “|” (On) position.The server starts automaticallyonce the power of the copier isswitched on.2 Enter the password (by department/user) by using the keypadand then select Enter.Each input digit is represented by an asterisk.The message “Please wait for X minute(s).” (X refers to the numeric value) isdisplayed.● If you switch on the machineimmediately after it has just beenswitched off, it will take more thanfive seconds to warm up.● If you switch on the power, the copyserver will activate automatically.“1.4 Entering Password”● The Password Entry screen will notbe displayed if the Auditron Mode isnot enabled.● If you made a mistake while enteringthe password, press the Clearbutton to clear, and then re-enter.
