65Basic Copy Procedure4.2 Interrupting CopyingYou can interrupt a current copy job to proceed with a more urgent job by pressing the Interrupt button.Once you press the Interrupt button, the current copy job will be paused as soon as it is possible. Theinterrupted copy job can be resumed once you exit the Interrupt mode.● You cannot press Interrupt to interrupt copying for a job that is programmed ahead or is a waiting job.● For copying with Collated selected, once the scanning of documents for copying is done and End Job is selected, the machinewill stop once all the scanned documents are copied.● Interrupt copying cannot be done when in the Save to File, Build Job, Edit/Print File, and Scan modes, except for reprintingsaved files.● You cannot do Interrupt copying when using System Settings/Meter Check.Procedure1 Press Interrupt.The interrupt indicator lights upand the machine stops. If youpress Interrupt when documentsare being scanned for copying orwhen a copy job is being done,the machine will enter theinterrupt mode with the indicatorlight blinking. Once the machinestops, the light is lit.2 Load the document for the interrupt copy job, and specifysettings for other features if necessary.3 Using the keypad, enter the number of copies desired andthen press Start on the control panel.The documents will be scanned for copying and the copies output onto theoutput tray.● Up to 1,000 pages of A4-sizedpages can be scanned for interruptcopying. Depending on the size ofthe document, however, an errormessage may appear before 1,000pages have been scanned.
