1.2 Switching On/Off Power10Knowing Your Copier1.2.3 Auto StartWhile waiting for the machine to warm up after the power is switched on, you can press the Startbutton to program copying. This feature is called Auto Start.■ Enabling Auto StartTo use the Auto Start feature, load the document, specify the desired settings and then press the Startbutton.The message “Please wait ... The job will start automatically.” will be displayed and copying will beginautomatically once the machine has entered the Ready to Copy mode.● If you have set the machine ready tone in Tools Mode, you will hear the tone when the machine has warmed up and is ready toaccept copy jobs. You can then proceed to set an Auto Start job after the tone. To set the machine ready tone or change its tonevolume, refer to “8.3 Setting Tools Mode”.■ Canceling Auto StartTo cancel an Auto Start job, select Stop on the screen or press the Stop button on the control panelbefore the document is scanned.Then press the C button and the Auto Start job will be canceled.Auto Start screen: When an A4 document is placed on the documentglass and three sets are to be made with no change in size.
