2.2 Loading Paper/Changing Paper Size of Paper Trays35Loading Paper2.2.4 Loading Paper in Tray 7The factory setting of the paper size is 8.5×11" or A4 portrait depending on your market area. You canchange the paper size to B5 portrait, A4 portrait, or 8.5×11" portrait.Tray 7 is meant for loading paper to be used as separators when copying with transparencyseparators or covers.● When adding paper to tray 7, remove any paper remaining in the tray, add it to the stack of paper to be added, then load all ofthe paper into the tray at once.● For details on the type of paper can be loaded in tray 7, refer to “2.1 Paper to Use”.Procedure1 Load the paper, aligning tothe front side of the tray.When changing the paper size:(1)Remove any paperfrom the tray.(2)While gripping thepaper guide, shift itback until the end.● Do not load different types of paperin the tray. This may result in paperjam.● Do not load paper exceeding themaximum fill line.
