xviSafety NotesRead these safety notes carefully before using this product to ensure you operate the machine safely.Precautions for Installation and RelocationDo not place the machine in a hot, humid,dusty, or poorly ventilated environment.Prolonged exposure to these adverseconditions can cause fire or electric shocks.Do not place the machine near heaters orvolatile, flammable, or combustible materialssuch as curtains that may catch fire.Place the machine on a level and sturdysurface that can withstand the machine weightof 421 kg (when installing all optional products).If tilted, the machine may fall over and causeinjuries.When relocating the machine, contact yourCustomer Support Center.The machine has ventilation holes on itsbottom. A poorly ventilated machine cancause excessive internal heat and fire.The accompanying diagrams show theminimum clearances required for normaloperation, consumables replacement, andmaintenance to ensure your machineoperates at peak performance. Yourrepresentative will provide necessary supportfor the proper installation of the machine.is used to alert operators to an operating procedure, practice, or condition that, ifnot strictly observed, can result in severe injury or loss of life.is used to alert operators to an operating procedure, practice, or condition that, ifnot strictly observed, might result in safety hazards to personnel or damage tothe equipment.This symbol is used to alert operators to a specific operatingprocedure that requires close attention. Read and follow instructionscarefully to insure the task is accomplished safely.This symbol is used to alert operators to a specific operatingprocedure that must not be performed. Read and follow instructionscarefully.This symbol is used to alert operators to a specific operatingprocedure that should be emphasized for operating safety. Read andfollow instructions carefully.This section explains the safety symbols used throughout the manualHeatedSurfaceFlammable ElectricShockPinchedfingersProhibit No Fire Do not teardownDo nottouchInstructions Unplug Ground/Earth
