294System Administrator Mode Settings8.2 Overview of Tools ModeThis section gives an overview of the Tools Mode.This section introduces you to the respective screens for setting and changing the features on Tools Mode, aswell as the function, range of setting, and the factory setting of each feature.■ Paper Tray AttributesThere are two ways to specify settings for paper tray.● Tray 6 (HCF) is optional.● Setting the paper type and color* indicates the factory setting.Item Description ValuesTray 1 Select the paper type and color for the paper to beloaded in trays 2 to 4 and the optional tray 6. Selectthe correct paper type to ensure that copies can bemade correctly. Selecting a wrong paper type mightlead to paper jam or machine breakdown.Before you set trays 2 to 4 and tray 6 (HCF) to Heavyweight 1, youmust select Disable for ATS of the respective trays on the AutoPaper / Auto Tray Switching screen.Plain*: 64 – less than105 g/m 2White, Blue, Green, Yellow,Buff, Goldenrod, Other 1,Other 2Tray 2 Plain*: 64 – less than105 g/m 2Heavyweight1: 105 – 128 g/m2White, Blue, Green, Yellow,Buff, Goldenrod, Other 1,Other 2Tray 3Tray 4Tray 6 (HCF)
