8.2 Overview of Tools Mode297System Administrator Mode Settings■ Copy DefaultsYou can set the default values of the copy features.The settings of the machine will return to the default values set here when the power is switched on;when the machine recovers from the Power Saver mode; or when the Clear All button is pressed. Soif you specify the settings or values of frequently used features as the default values, there is no needto change these values whenever you need to use them.Item Description Available optionsPaper Supply Specify the default value of Paper Supply on the BasicFeatures screen.Paper Supply cannot be set to Auto when the settingof Reduce/Enlarge is Auto%.This default value is also applicable to the BodyPages Tray of Covers on the Output Format screen.However, if you select Auto here, the default value forthe Front/Back Cover Tray of Covers will be the firstpriority tray. (The first priority tray is usually tray 1, orthe optional tray 6 (HCF) if it is installed.)Auto*, tray 1, tray 2, tray 3,tray 4,tray 6 (HCF) (optional)Covers Specify the default value of the tray for Covers on theOutput Format screen.Tray 1, tray 2*, tray 3, tray 4,tray 6 (HCF) (optional), tray 7Booklet Creation Specify the default value of the tray for BookletCreation on the Output Format screen.Tray 1, tray 2*, tray 3, tray 4,tray 6 (HCF) (optional), tray 7Reduce/Enlarge Specify the default value of Reduce/Enlarge on theBasic Features screen.Nine preset ratios are displayed there for yourselection. Out of the nine ratios, three (100%, Auto%,and 50%) are fixed but you can choose to display anyother six ratios from a list of 20 from R/E Presets ofTools Mode.Auto% cannot be selected here if the default value forPaper Supply is Auto.100%*, Auto%, 50%, 141%,122%,115%, 86%, 81%,70%, 25%, 35%, 64%, 78%,97%, 127%, 129%, 154%,180%, 200%, 220%, 282%,400%Original Type Specify the default value of Original Type on theImage Quality screen.Text & Photo, Text*, Photo,MapText & Photo Specify the default value of Text & Photo of OriginalType.Halftone*, Photograph, LightTextPhoto Type Specify the default value of Photo of Original Type. Halftone*, PhotographText Type Specify the default value of Text of Original Type. Normal Text, Pencil Text(Black)Lighter/Darker Specify the default value of Lighter/Darker on theImage Quality screen.Auto*,Lightest-Normal-Darkest(7 levels)Density Control Specify the default values of the three density levels(high, medium, and low) of Density Control on theImage Quality screen.Low Density: -3 to 0* to +3Medium Density: -3 to 0* to +3High Density: -3 to 0* to +3(7 levels each)Sharpness Specify the default value of Sharpness on the ImageQuality screen.Softer to Normal* to Sharper(5 levels)Margin Shift(Side 1)Specify the default values of Margin Shift (Side 1 andSide 2) on the Added Features screen.No Shift*Auto CenterCorner ShiftVariable ShiftMargin Shift(Side 2)
