8.5 Auditron Menu311System Administrator Mode Settings4 Select Confirm.The password, copy limit, and current copy volume of the account appears.5 Check the settings and then select Close.The display returns to the Auditron Menu screen.6 Exit from the Auditron Administration mode.●8.5.2 Create/Modify AccountsYou can specify password to an account (by department/user) and modify its copy limit here. You canalso reset the copy volume of the accounts. You can register up to 2,000 accounts.● When using Auditron Administration mode to modify the copy limit for accounts (by department/user), the number of copiesoutput will exceed the copy limit in the following conditions:• When Auto, Auto (Large Output), or Collated is selected, the number of copies set is greater than one, and Start ispressed. In this case, the copy job in progress continues even if the copy limit is exceeded during copying.• When Auto, Auto (Large Output), or Collated is selected, the number of copies set is greater than one, and Start is pressed.In this case, even if the copy limit is exceeded during copying, the next set is copied to the end if even one sheet of paper forcopying the next set has been fed into the unit from the paper tray.• When Auto, Auto (Large Output), or Collated is selected, the number of copies is set to one, multiple documents are set inthe DADF and Start is pressed. In this case, if the copy limit is exceeded during copying, copying of the set documentscontinues.• When Uncollated is selected, and you press Start. In this case, if paper is fed from the paper tray to the unit, copying of thefed sheet of paper continues even if the copy limit is exceeded during copying.Procedure1 Display the Auditron Menu screen.2 Select Create/Modify Accounts.The Create/Modify Accounts screen is displayed.“8.1.3 Entering/Exiting AuditronMode”“8.1.3 Entering/Exiting AuditronMode”
