126Making Copies AddedFeaturesBasicFeaturesImageQuality Stored JobTemplatesOutputFormat5.15Copying Mixed Size OriginalsThis feature allows you to scan documents of various sizes before copying them onto the corresponding copypaper sizes. Alternatively, you can make copies of these documents on one selected paper size.● This feature only works when documents are loaded in the DADF.● Only standard-sized documents can be used for this feature.● You cannot select Mixed Size Originals in combination with Multiple Up, Repeat Image, or Bound Originals.OffSelect this when the document sizes are all the same.OnSelecting this when copying documents of various sizes will enable the sizes to be detected automaticallyand then copied on suitable copy paper sizes. When Reduce/Enlarge is specified, the copies will be madeon paper sizes based on the reduction/enlargement percentage.Procedure1 Align edge A and B of thedocuments.Remove any staples or clips.Copies might not be done well ifthe edge B of the documents arenot aligned properly.2 Load the documentsaligned to the edge of theDADF.Align edge A of the documentswith the feeding point of theDADF and then align thedocuments with the documentguide.Mixed Size OriginalsRep ort ReportReport● Edge A of the document refers tothe edge that is to be inserted intothe DADF.“3.2.2 Loading in DADF”● Ensure that edge A of thedocuments are aligned to the edgeof the DADF.Document Copies of similar size as documents Copies of similar size
