133Making Copies AddedFeaturesBasicFeaturesImageQuality Stored JobTemplatesOutputFormat5.18Adjusting Copy DensityThis feature allows you to adjust the copy density.Options available for this feature are:AutoThe copy density will be automatically adjusted.However, if Photo or Map has been selected for Original Type, the copy density will be adjusted to thelevel of Normal.Lightest-DarkestYou can select from seven levels of copy density from Lightest to Darkest.● Auto cannot be selected together with any of the Lightest-Darkest levels.● The factory setting is Normal.● If any image quality preset has been selected, the copy density will be automatically set. Any copy density level set before selectingan image quality preset will be changed accordingly.Procedure1 Load the documents.2 Select a copy density level from Lighter/Darker on the ImageQuality screen.3 Using the keypad, enter the number of copies desired andthen press Start on the control panel.Copies will be made.●Lighter/Darker“3.2 Loading Documents”● You can adjust the copy densityexcept Auto on the Basic Featuresscreen.● Auto cannot be selected togetherwith any of the Lightest-Darkestlevels.Document Lightest Darkest
