171Making Copies AddedFeaturesBasicFeaturesImageQuality Stored JobTemplatesOutputFormat5.29Copying on Tab PaperYou can copy images from a document onto tab paper by specifying the copied position within a range of 1-15mm so that the image would be copied onto the tab.These copied papers can be loaded in Tray 7 and used as covers or separators.Available tab paper sizes are A4 portrait and 8.5×11" portrait.● Be sure to use the tab paper recommended by Fuji Xerox. Otherwise, a paper jam or failure may result.Copy to TabThe image is copied only onto the tab of the tab paper. You can specify the position to shift within a range of1 to 15 mm.Shift AllThe entire page is copied onto the tab paper. You can specify the position to shift within a range of 1 to 15mm.● The factory setting for the margin shift is 13 mm.● Tab Copying cannot be selected with Margin Shift, Edge Erase, Binding Erase, Multiple Up, Repeat Image, Booklet Creation,Annotation, Bound Originals, Book Duplex, or 2 Sided Copying features.● It is recommended that 100% for Reduce/Enlarge is set to copy onto the correct position.● You can select only the left position for stapling/punching on tab papers.Tab CopyingCopy to Tab Shift AllRe port Rep ortReportReportReportReportReportOriginal Size Range of shifting theimage (1-15 mm)Document Copy using copies as cover separators
