69Basic Copy Procedure4.4 Copying on TransparencyTo copy on transparencies, load them in tray 5 (bypass) and then select the correct paper type for copying.● Do not load the transparencies into trays 1, 2, 3, and 4 and the optional trays 6 (HCF) and 7 as it may cause machinebreakdown or paper jam.● Use only the recommended transparencies. If not, it may cause machine breakdown or paper jam.If you select Transp Separators on the Output Format screen, one sheet of blank paper will be insertedautomatically after every transparency copied.To copy on transparency, you must load paper in the same orientation and of the same paper size as thedocument in trays 1, 2, 3, 4 or the optional trays 6 (HCF) and 7 beforehand.● The separators, output as blank paper, will not be used for copying and will not be counted by the meters. However, they will becounted if Printed Separators is selected on the Transparency Separators screen.“5.23 Inserting Transparency Separators”Procedure1 Load the documents.2 Load transparencies intray 5 (bypass).Adjust the guide gently to alignthe transparencies.The Tray 5 (bypass) screen isdisplayed.3 Select A/B Series Size and A4 P for Paper Size andTransparency for Paper Type.“3.2 Loading Documents”● Use transparencies meant forprinting in black and white.● Load OHP (V515) in portraitdirection to prevent paper jam.
