Page 96 FT DX 3000 O peraTing M anualMoving Memory Data to the VFO-A register. 3ress the [V/M@ Eutton as necessary to go to the³0emory´ mode. 7he memory channel numEer Zillappear in the 9)2% freTuency display.A dvice :If you can not enter the ³0emory´ mode checN tosee if the transceiYer is in 9)2% mode the green[VFO-B RX @ Indicator6Zitch is illuminated . If sopress the [VFO-A RX @ Indicator6Zitch to returnoperation to 9)2$. 1oZ press the [V/M@ button toenter the ³0emory´ mode.. 3ress the [MCH/GRP@ Eutton. 7he orange /(' in-side the sZitch Zill light up indicating that you areready to recall a memory channel.. 5otate the [CLAR/VFO-B@ knob to select thememory channel the contents of which you wish totransfer to 9)2$.. 3ress and hold in the [M X A@ Eutton for one seconduntil you hear the double beep. The data in the se-lected memory channel will now be transferred to9)2$.A dvice :7his transfer of data to 9)2$ does not affect the origi-nal contents of the memory channel this is a ³copy´function that leaves the memory contents unchanged.[V/M] Button[VFO-A(RX)] Button[VFO-B(RX)] Button[MCH/GRP] Button[CLAR/VFO-B] Knob[MX A] Buttonm emorY o perationStAndArd MeMory operAtion[AX M] Button[CLAR/VFO-B] Knob[LOCK] Button[V/M] ButtonErasing Memory Channel Data. 3ress the [V/M@ Eutton if necessary to enter the9)2 mode.. 3ress the [A X M@ button. The data stored in the cur-rently selected memory channel will be displayed inthe freTuency field.. 5otate the [CLAR/VFO-B@ knob to select the mem-ory channel that you would like to erase. The memo-ry channel numEer appears in the 9)2% freTuencydisplay.. 3ress the [LOCK@ button to erase the contents of theselected memory channel.A dvice : The FTDX 3000 can not erase the memory channels³01´ and ³5M-01´ through ³5M-10´ 8.6. Yer-sion). If you make a mistake and wish to restore the memo-ry¶s contents just repeat steps through aEoYe.
