Yamaha YZF-R1B 2012 Service Manual

Also see for YZF-R1 2012: Service manual

Contents

FRONT BRAKE4-37ECA1CW1401Replace the brake disc bolts with newones.TIP• When installing the brake disc and frontspeed sensor rotor (only on the left side),align the arrow “1” on the brake disc, arrow“2” on the front speed sensor rotor and arrow“3” on the front wheel in the direction ofwheel rotation.• Tighten the brake disc bolts in stages and ina crisscross pattern.d. Measure the brake disc deflection.e. If out of specification, repeat the adjust-ment steps (a) through (d) until the brakedisc deflection is within specification.f. If the brake disc deflection cannot bebrought within specification, replace thebrake disc.▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲6. Install:• Front wheelRefer to “FRONT WHEEL” on page 4-17.EAS14B1004REPLACING THE FRONT BRAKE PADSTIP• When replacing the brake pads, it is not nec-essary to disconnect the brake hose or dis-assemble the brake caliper.• Remove the front speed sensor first to pre-vent damage to the front speed sensor.1. Remove:• Brake hose holder “1”• Front speed sensor• Brake caliper “2”2. Remove:• Brake pad clips “1”• Brake pad pins “2”• Brake pad springs “3”3. Remove:• Brake pads “1”Brake disc bolt18 Nm (1.8 m·kgf, 13 ft·lbf)LOCTITE®Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk