Yamaha YZF-R1B 2012 Service Manual

Also see for YZF-R1 2012: Service manual

Contents

FEATURES1-13Clock and stopwatch modesTo set the clock1. Push the “SELECT” button and “RESET”button together for at least two seconds.2. When the hour digits start flashing, pushthe “RESET” button to set the hours.3. Push the “SELECT” button, and the minutedigits start flashing.4. Push the “RESET” button to set the min-utes.5. Push the “SELECT” button and thenrelease it to start the clock.To display the stopwatchTo change the display to the stopwatch mode,push the “SELECT” button and “RESET” but-ton together. To change the display back to theclock mode, push the “SELECT” button and“RESET” button together; however, this is notpossible when the stopwatch is counting.Standard measurement1. Push the “RESET” button to start the stop-watch.2. Push the “SELECT” button to stop the stop-watch.3. Push the “SELECT” button again to resetthe stopwatch.Split time measurement1. Push the “RESET” button to start the stop-watch.2. Push the start switch “ ” or “RESET” but-ton to measure split times. Split times aredisplayed on the odometer display for fiveseconds.3. Push the start switch “ ” or “RESET” but-ton to display the final split time or push the“SELECT” button to stop the stopwatch anddisplay the final split time.Split time historyThe split time history displays up to 20 storedsplit times. The split time history can be dis-played either in reverse chronological order orby speed.1. Push the “SELECT” button for at least onesecond to select the reverse chronologicalorder mode; “L20” displays on the stop-watch.Push the “SELECT” button again to selectthe speed mode; “F20” displays on thestopwatch.TIP• Reverse chronological order mode: The splittimes are shown from the latest to earliest(i.e., L1, L2, L3, L4).• Speed order mode: The split times areshown from the fastest to slowest (i.e., F1,F2, F3, F4).2. Push the “RESET” button. Depending onthe selected split time, “L1” or “F1” displayson the coolant temperature display/airintake temperature display, and its corre-sponding stored split time displays on thestopwatch.3. Push the “SELECT” button to switch thedisplayed split time in ascending order (i.e.,1, 2, 3, 4), and the “RESET” button toswitch the displayed split time in descend-ing order (i.e., 20, 19, 18, 17).TIP• To switch between the reverse chronologicalorder mode and the speed mode, push the“SELECT” button for at least one second tocancel the currently selected mode, and thenrepeat step 1 to select the desired mode.1. Clock/stopwatch 1. Coolant temperature display/air intake tem-perature display2. StopwatchManuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk