Yamaha YZF-R1B 2012 Service Manual

Also see for YZF-R1 2012: Service manual

Contents

CLUTCH5-662. Install:• Pressure plate 2 “1”• Clutch boss “2”TIPFit the groove “a” of the pressure plate 2 to theprojection “b” of the clutch boss to assemble.3. Install:• Springs “1”• Clutch boss nut “2”TIP• Lubricate the clutch boss nut threads withengine oil.• While holding the clutch boss “3” with theuniversal clutch holder “4”, tighten the clutchboss nut.• Stake the clutch boss nut at a cutout “a” inthe main axle.4. Lubricate:• Friction plates• Clutch plates(with the recommended lubricant)5. Install:• Friction plates• Clutch platesTIP• First, install a friction plate and then alternatebetween a clutch plate and a friction plate.• Install the last friction plate “1” offset from theother friction plates “2”, making sure to aligna projection on the friction plate with thepunch mark “a” on the clutch housing.Clutch boss nut115 Nm (11.5 m·kgf, 85 ft·lbf)NewUniversal clutch holder90890-04086YM-91042Recommended lubricantEngine oilManuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk