Yamaha YZF-R1B 2012 Service Manual

Also see for YZF-R1 2012: Service manual

Contents

ENGINE REMOVAL5-117. Tighten:• Engine mounting nut (rear lower side) “1”• Engine mounting nut (rear upper side) “2”TIPFirst tighten the engine mounting nut (rearlower side), and then tighten the enginemounting nut (rear upper side).8. Tighten:• Engine mounting bolt (front left side) “1”9. Tighten:• Engine mounting bolt (front right side) “1”EAS14B1014INSTALLING THE EXHAUST PIPE ANDMUFFLER1. Install:• Right footrest assemblyRefer to “ADJUSTING THE RIDERFOOTRESTS” on page 4-15.2. Install:• Muffler gasket “1”(to muffler)• MufflerTIP• When installing the muffler gasket, set thesurface “a” with the carbon to the back.• When installing the catalyst pipe assemblyand muffler clamp, tip of the tab “b” shouldnot contact the edge of the muffler gasket.Engine mounting nut (rearlower side)51 Nm (5.1 m·kgf, 37 ft·lbf)Engine mounting nut (rearupper side)51 Nm (5.1 m·kgf, 37 ft·lbf)Engine mounting bolt (front leftside)70 Nm (7.0 m·kgf, 50 ft·lbf)Engine mounting bolt (frontright side)70 Nm (7.0 m·kgf, 50 ft·lbf)NewManuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk