THERMOSTAT6-10EAS26450CHECKING THE THERMOSTAT1. Check:• Thermostat “1”Does not open at 71–85 °C (159.8–185.0°F) → Replace.▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼a. Suspend the thermostat “1” in a container“2” filled with water.b. Slowly heat the water “3”.c. Place a thermometer “4” in the water.d. While stirring the water, observe the ther-mostat and thermometer’s indicated tem-perature.TIPIf the accuracy of the thermostat is in doubt,replace it. A faulty thermostat could cause seri-ous overheating or overcooling.▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲2. Check:• Thermostat housing cover “1”• Thermostat housing “2”Cracks/damage → Replace.3. Check:• Thermostat hoses• Thermostat bypass hoses• Water pump bypass hose• Engine outlet pipeCracks/damage → Replace.EAS26460ASSEMBLING THE THERMOSTAT ASSEM-BLY1. Install:• Thermostat housing “1”• Thermostat “2”• O-ring “3”• Thermostat housing cover “4”TIPInstall the thermostat with its breather hole “a”facing up.A. Fully closedB. Fully openThermostat housing cover nut10 Nm (1.0 m·kgf, 7.2 ft·lbf)NewManuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk