FUEL INJECTION SYSTEM8-746 Ignition coil malfunction(Check the resistance of igni-tion coil #4.)Refer to “CHECKING THEIGNITION COILS” on page 8-136.Ignition coil inspectionmethodStart and idle the engine forapproximately 5 seconds.Then, check the fault codeindication.No fault code indicated. →Recovered.Fault code indicated. →Check the next step.7 ECU malfunction Check in the diagnostic mode(Code No. 33).If not ignited, replace thedefective ECU.Fault code No. 36Symptom Ignition coil #4 primary lead malfunctionFail-safe actionEngine startup: Possible (depending on the number of failed cylin-ders)Riding: Possible (depending on the number of failed cylinders)Diagnostic monitor-ing code No. D:33Meter displayActuates the cylinder-#4 ignition coil five times at one-second inter-vals.Illuminates the engine trouble warning light.Checking method Check the spark five times.• Connect an ignition checker.Item/components andprobable cause Check or maintenance job Sensor inspection proce-dureManuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keysemail: info@motomatrix.co.uk