Name Type DescriptionCMDBIT8 BOOLEAN Command out bit 8CMDBIT9 BOOLEAN Command out bit 9CMDBIT10 BOOLEAN Command out bit 10CMDBIT11 BOOLEAN Command out bit 11CMDBIT12 BOOLEAN Command out bit 12CMDBIT13 BOOLEAN Command out bit 13CMDBIT14 BOOLEAN Command out bit 14CMDBIT15 BOOLEAN Command out bit 15CMDBIT16 BOOLEAN Command out bit 16CMDBIT17 BOOLEAN Command out bit 17CMDBIT18 BOOLEAN Command out bit 18CMDBIT19 BOOLEAN Command out bit 19CMDBIT20 BOOLEAN Command out bit 20CMDBIT21 BOOLEAN Command out bit 21CMDBIT22 BOOLEAN Command out bit 22CMDBIT23 BOOLEAN Command out bit 23CMDBIT24 BOOLEAN Command out bit 24CMDBIT25 BOOLEAN Command out bit 25CMDBIT26 BOOLEAN Command out bit 26CMDBIT27 BOOLEAN Command out bit 27CMDBIT28 BOOLEAN Command out bit 28CMDBIT29 BOOLEAN Command out bit 29CMDBIT30 BOOLEAN Command out bit 30CMDBIT31 BOOLEAN Command out bit 31CMDBIT32 BOOLEAN Command out bit 3210.9.5 SettingsTable 241:AUTOBITS Non group settings (basic)Name Values (Range) Unit Step Default DescriptionOperation OffOn- - Off Operation Off / On10.9.6 Operation principleAutomation bits function (AUTOBITS) has 32 individual outputs which each can bemapped as a Binary Output point in DNP3. The output is operated by a "Object 12" inDNP3. This object contains parameters for control-code, count, on-time and off-time.To operate an AUTOBITS output point, send a control-code of latch-On, latch-Off,pulse-On, pulse-Off, Trip or Close. The remaining parameters will be regarded were1MRK 511 287-UEN A Section 10Control333Technical manual
