11.7.4 SignalsTable 328:IB16A Input signalsName Type Default DescriptionBLOCK BOOLEAN 0 Block of functionINP INTEGER 0 Integer InputTable 329:IB16A Output signalsName Type DescriptionOUT1 BOOLEAN Output 1OUT2 BOOLEAN Output 2OUT3 BOOLEAN Output 3OUT4 BOOLEAN Output 4OUT5 BOOLEAN Output 5OUT6 BOOLEAN Output 6OUT7 BOOLEAN Output 7OUT8 BOOLEAN Output 8OUT9 BOOLEAN Output 9OUT10 BOOLEAN Output 10OUT11 BOOLEAN Output 11OUT12 BOOLEAN Output 12OUT13 BOOLEAN Output 13OUT14 BOOLEAN Output 14OUT15 BOOLEAN Output 15OUT16 BOOLEAN Output 1611.7.5 SettingsThe function does not have any parameters available in local HMI or Protection andControl IED Manager (PCM600)11.7.6 Operation principleWith integer 15 on the input INP the OUT1 = OUT2 = OUT3= OUT4 =1 and theremaining OUTx = 0 for (5≤x≤16).OUTx represents a value when activated. The value of each of the OUTx is inaccordance with the table IB16A_1. When not activated the OUTx has the value 0.In the above example when integer 15 is on the input INP the OUT1 has a value =1,OUT2 has a value =2, OUT3 has a value =4 and OUT4 has a value =8. The sum ofthese OUTx is equal to 1 + 2 + 4 + 8 = 15.Section 11 1MRK 511 287-UEN ALogic382Technical manual
