Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory,it was programmed to Mode 2. The mode towhich the vehicle was programmed may havebeen changed since it left the factory.To program the vehicle to a different mode, usethe following procedure:1. Enter the PERSONAL SETTINGS MENU byfollowing the instructions listed previouslyunder “Entering the Personal Settings Menu.”2. Turn the tune/select knob until STARTBUTTON RECALL is highlighted.3. Press the tune/select knob to switch back andforth between on and off.When the mode is turned on, a check markwill appear next to the feature name.If this feature is selected, REMOTE RECALLMEMORY cannot be selected.The mode you selected is now set. You can eitherexit the programming mode by following theinstructions later in this section or program thenext feature available on your vehicle.AUTO EXIT SEATIf your vehicle has the optional memory package,you will have this feature. When this feature isturned on, you can recall any previouslyprogrammed exit position for the driver’s seatwhen the vehicle is off, the shift lever is inPARK (P), and the driver’s door is opened.Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory,it was programmed to Mode 2. The mode towhich the vehicle was programmed may havebeen changed since it left the factory.155
