Instrumentation and Controls. . . 134To quickly set a tone control to itsmiddle position, press and holdthe push-button under BASS(bass), MID (midrange), or TREB(treble) for more than twoseconds.You will hear one beep.To quickly set all speaker and tonecontrols to their middle positions,press and hold the TUNE/TONE(tune/tone) knob for two seconds.If a station is weak or noisy, youmay want to lower the treble tone.Digital Signal Processing(If equipped)This feature is used to provide achoice of different listeningexperiences. It can be used whilelistening to the radio or the CDplayer.To choose a DSP setting:1. Press the TUNE/TONE (tune/tone) knob until a digitalsignal processing settingappears on the display.2. Press the push-button underthe desired setting.- NORMAL (normal)This setting provides the bestoverall sound quality for allseating positions.- DRIVER (Driver)This setting gives the driverthe best possible soundquality.- REAR (rear)This setting gives the rearseat occupants the best pos-sible sound quality.$10araCTS Page 134 Tuesday, September 15, 2009 12:30 PM
