Instrumentation and Controls. . . 196If something blocks the seat orsteering column while recalling amemory position, the feature maystop working.1. Remove the obstruction.2. Press the control for the seator steering column for twoseconds to reset the system.3. Press the memory buttonagain.The seat or steering columnshould move to the desiredposition.If the system does not operate asdescribed above, see your dealerfor service.Exiting the VehicleTo make it easy to get in and outof the vehicle, you can use the exitbutton.The automatic transmission mustbe in P (Park) or with a manualtransmission, the parking brakemust be engaged.Pressing this button recalls thememory exit position. A chime willsound and the seat will move allthe way back. If your vehicle isequipped with the telescopicpower tilt steering wheel, thesteering wheel will move up andtowards the instrument panel.You can also use the Driver Infor-mation Center to select when theeasy exit position will be recalled.• If your vehicle is equipped withthe Remote Keyless Entrytransmitter, the easy exitposition may be recalled whenthe key is removed from theignition.• If your vehicle is equipped withthe Keyless Access transmitterand the ignition switch isturned to the off position, theeasy exit position may berecalled when you open thedriver’s door.For more information on using theDriver Information Center topersonalize or disable this feature,see "Feature Customization" under"Driver Information Center" earlierin this Section.$10araCTS Page 196 Tuesday, September 15, 2009 12:30 PM
