Service and Maintenance. . . 3705. Remove the valve cap fromthe valve stem and increase ordecrease the tire air pressurefor 10 seconds or until thehorn chirps.To release air, push on themetal stem in the center of thetire valve.The horn chirp may take up to30 seconds to sound,confirming the tire positionhas been stored.6. Repeat the previous step foreach of the remaining tires inthe following order: rightfront tire, right rear tire, thenleft rear tire.7. After the horn sounds twice toconfirm the last tire positionhas been stored, the horn willsound two more times tosignal the end of the process.Turn the ignition to the offposition.8. Set the tire pressures to thecorrect level.See the tire information labelfor your vehicle's tire inflationspecifications.9. Be sure to put the valve capsback on the valve stems. Theyhelp prevent leaks by keepingout dirt and moisture.See your dealer for additionalassistance if needed.$10araCTS Page 370 Tuesday, September 15, 2009 12:30 PM
