63 . . .–Section 1REMOTE DOOR LOCKFEEDBACK (remote door lockfeedback)This feature allows you to selectthe type of feedback you willreceive when locking the vehicleusing the remote keyless entry orthe keyless access transmitters.You will also receive the selectedfeedback when locking the vehicleusing the passive locking feature.Note:You will only receive feedback ifthe doors are closed.Press the button to enter thesubmenu.While in this submenu, press thebutton repeatedly to scrollthrough the following options:• OFF (off)There is no horn or lights feed-back when the lock button onthe transmitter is pressed.• LIGHTS ONLY (lights only)With this setting activated, theexterior lights will flash whenthe lock button on thetransmitter is pressed.• HORN ONLY (horn only)With this setting activated, thehorn will sound when the lockbutton on the transmitter ispressed twice.• HORN & LIGHTS (horn andlights)With this setting activated, theexterior lights will flash whenthe lock button on the trans-mitter is pressed.The horn will sound if you pressthe lock button again withinfive seconds.This is the default setting.• NO CHANGE (no change)Once the desired setting isdisplayed, press the button toselect it.You may now either exit program-ming mode or program the nextavailable feature.To exit programming mode, see"Exiting Programming Mode" laterin this section.See "Keyless Access System" inSection 3 for more information.Also, see "Remote Keyless Entry" inSection 3.$10araCTS Page 63 Tuesday, September 15, 2009 12:30 PM
