Machine Ready Tone Sets the volume of the tone that is emitted when the printer becomes ready,or disables the tone.Copy Completed Tone Sets the volume of the tone that is emitted when a copy job is complete, ordisables the tone.Job Completed Tone Sets the volume of the tone that is emitted when a job other than a copy jobis complete, or disables the tone.Fault Tone Sets the volume of the tone that is emitted when a job ends abnormally, ordisables the tone.Alert Tone Sets the volume of the tone that is emitted when a problem occurs, ordisables the tone.Out of Paper Tone Sets the volume of the tone that is emitted when the printer runs out ofpaper, or disables the tone.Low Toner Alert Tone Sets the volume of the tone that is emitted when the toner is low, ordisables the tone.Auto Clear Alert Tone Sets the volume of the tone that is emitted 5 seconds before the printerperforms auto clear, or disables the tone.NFC Authentication Tone Sets the volume of the tone that is emitted when an NFC card is placed onthe NFC reader for authentication, or disables the tone.All Tones Sets the volume of all the alert tones, or disables all the tones.Low Toner Alert Message Alerts you if the toner is low.OffHook Wake Up Sets whether to wake up from Sleep or Deep Sleep mode when you pick upthe handset of the external telephone.Auto Log Print Sets if a job history needs to be printed after every 20 jobs.RAM Disk Sets whether to allocate RAM for the file system for the Secure Print, ProofPrint, Private Mail Box Print, and Public Mail Box Print features.Panel Language Used to set the language on the touch panel.Max E-mail Size Sets the maximum size of e-mail that can be sent. The available range isfrom 50 to 16384 (KB) (Default: 2048).Auto Reset Sets the amount of time before the printer automatically resets its settingsto the defaults when no additional settings are made.Fault Time-out Sets the amount of time the printer waits before canceling a job that stopsabnormally.Default Paper Size Sets the default print paper size.Print ID Sets where to print the user ID on the output paper.Print Text Sets whether the printer outputs PDL data (which is not supported by theprinter) as text when the printer receives it.Banner Sheet Insert Position Sets where to insert a banner sheet in the output.Banner Sheet Specify Tray Sets from which tray a banner sheet is fed.Substitute Tray Sets whether to use another size paper when the paper that is loaded in thespecified tray does not match the paper size settings for the current job.Letterhead 2 Sided Sets whether to print on both sides of letterhead.A4<>Letter Switch Sets whether to print A4 size jobs on Letter size paper if A4 is not availablein the paper trays and vice versa (Letter size job on A4 size paper).Report 2 Sided Print Sets whether to print reports on both sides a sheet of paper.Use Another Tray Sets whether to show a message to select another tray when the specifiedpaper is not available in the paper tray.Dell™ Printer Configuration Web Tool 139
