Error-Code What you can do031-584 Unable to create a scan folder on the FTP server. Tap Close, or wait for 60 seconds for the printer torecover. Check if the folder name you specified can be created in storage location. Check if the folder thathas the same name as the one you specified already exists.031-585 Unable to delete a file on the FTP server. (DEL command failure.) Tap Close, or wait for 60 seconds forthe printer to recover. Check server access rights.031-587 Unable to delete a folder on the FTP server. (RMD command failure.) Tap Close, or wait for 60 secondsfor the printer to recover. Check server access rights.031-588 Unable to write a file to the FTP server location. Tap Close, or wait for 60 seconds for the printer torecover. Check if storage location has free space.031-590 Job canceled. Tap Close, or wait for 60 seconds for the printer to recover. Change the file name thatalready exists on FTP server.031-594 FTP transfer type error. (TYPE command failure.) Tap Close, or wait for 60 seconds for the printer torecover. Try the same operation again. Contact customer support if this failure is repeated.031-595 FTP data port error. (PORT command failure.) Tap Close, or wait for 60 seconds for the printer to recover.Try the same operation again. Contact customer support if this failure is repeated.031-598 FTP append data error. (APPE command failure.) Tap Close, or wait for 60 seconds for the printer torecover. Check if the printer has access rights to append data to the FTP server. Check if server supportsFTP append command.031-599 FTP rename file error. (RNFR command failure.) Tap Close, or wait for 60 seconds for the printer torecover. Check if the printer has access rights to rename data on the FTP server. Check if server supportsFTP rename command.033-513 Tap Close, or wait for 60 seconds for the printer to recover. Try the following:• Print the received fax, or wait for a while until sending a fax is completed.• Print the fax job stored using the Secure Receive feature.For more information about the Secure Receive feature, see "Using the Secure Receiving Mode."033-527 Tap Close, or wait for 60 seconds for the printer to recover. Wait for a while until the printer is not busy,and try again.033-528 Tap Close, or wait for 60 seconds for the printer to recover. Check the available time period for the FAX,and try again.033-762 Tap Close, or wait for 60 seconds for the printer to recover. The printer rejects faxes sent from unwantednumbers. For more information, see "Junk Fax Setup."033-776 The size of the fax document data is too large and may have exceeded the space available in memory. Lowerthe scan resolution rate and then try scanning again. For details, see "Adjusting the Document Resolution."033-788 Tap Close, or wait for 60 seconds for the printer to recover. Try the following:• Remove the received fax, or wait for a while until sending a fax is completed.• Print the fax job stored using the Secure Receive feature.For more information about the Secure Receive feature, see "Using the Secure Receiving Mode."034-515 Tap Close, or wait for 60 seconds for the printer to recover. Try the following:• Try the same operation.• Check the printer or remote machine if the memory is full.Understanding Printer Messages454
