Option DescriptionSent Fax Forward You can set your printer to forward incoming faxes to another faxnumber, or forward them to an e-mail address. When a fax arrivesat your printer, it is stored in the memory. Then, the printer dialsthe fax number you have specified in Forwarding Numberor sends an e-mail to the address you have specified inForwarding E-mail Address 1-5.To forward to a fax number, you need to register a fax number onForwarding Number. To forward to an e-mail address, youneed to register information on E-Mail Server andForwarding E-mail Address. For information on email alert, see "E-Mail Server" and on forwarding number and email address, see "Fax Settings."Tap Off not to forward incoming faxes.Tap Forward to forward incoming faxes without printing. If anerror occurs during forwarding a received fax, the printer prints thefax.Tap Print and Forward to forward and print incomingfaxes.Tap Print and E-mail to print and forward incoming faxesto e-mail.Tap Forward to Server to forward incoming faxes toserver.Tap Print and Forward to Server to print andforward incoming faxes to server.2 Sided Print You can set whether to make duplex print when you print faxes.Tap Off to print faxes on one side of a sheet of paper.Tap On to print faxes on both sides of a sheet of paper.Remote Receive You can receive a fax by pressing the remote receive code on theexternal telephone after picking up the handset of the telephone.When you set Remote receive to On, specify a two digitremote receive code in Remote Receive Tone.Discard Size When receiving a document as long as or longer than the paperinstalled in your printer, you can set the printer to discard anyexcess at the bottom of the page. If the received page is outsidethe margin you set, it will print on two sheets of paper at theactual size. When the document is within the margin andDiscard Size is set to Auto Reduction, the printerreduces the document to fit it onto the appropriate sized paperand discard does not occur. If Discard Size is set to otherthan Auto Reduction, the data within the margin will bediscarded.Transmission Auto Redial Setup Redial Attempts You can specify the number of redial attempts to make when theDefaults destination fax number is busy, within the range of 0 to 13. If youenter 0, the printer will not redial.Interval of Redial Your printer can automatically redial a remote fax machine if itwas busy. Intervals from 1–15 minutes can be entered.Resend Delay You can specify the interval between transmission attempts withinthe range of 3 to 255 seconds. The default is 8 seconds.372 Faxing
