Auto Redial SetupPurpose:To configure settings for automatic redial.Values:Redial Attempts 3* Sets the number of redial attempts to make when thedestination fax number is busy. If you enter 0, the printerwill not redial. The value is set in increments of 1.Interval of RedialAvailable Range: 0-131 minute * Sets the interval between redial attempts. The value is setin increments of 1 minute.Resend DelayAvailable Range: 1-15 minutes8 seconds* Sets the interval between re-send attempts. The value is setin increments of 1 second.Available Range: 3-255 secondsTone / PulsePurpose:To select the dialing type.Values:Tone* Uses tone dialing.Pulse(10PPS) Sets "DP (10PPS)" (Dial Pulse, 10 Pulse Per Second) as the dial type.Pulse(20PPS) Sets "DP (20PPS)" (Dial Pulse, 20 Pulse Per Second) as the dial type.Prefix DialPurpose:To select whether to set a prefix dial number.Values:Off * Does not set a prefix dial number.On Sets a prefix dial number.Prefix Dial Number Sets a prefix dial number of up to five digits. This number dials before anyauto dial number is started. It is useful for accessing the Private AutomaticBranch Exchange (PABX).Fax Cover PagePurpose:To set whether to attach a cover page to faxes.Values:Off* Does not attach a cover page to faxes.On Attaches a cover page to faxes.Understanding the Printer Menus 237
