Option DescriptionIncomingDefaultsReceive Mode You can select the default fax receiving mode.• Telephone (manual receive mode): Automatic fax reception isturned off. You can receive a fax by picking up the handset of theexternal telephone and then pressing the remote receive code, orby tapping Manual Receive in On Hook and thentapping Receive. For details about Manual Receive,see "Receiving a Fax Manually in the Telephone Mode."• Fax: (automatic receive mode)• Telephone / Fax: When the printer receives an incoming fax, theexternal telephone rings for the time specified in Auto RecFax/Tel, and then the printer automatically receives a fax. Ifan incoming call is not a fax, the printer beeps from the internalspeaker indicating that the call is a telephone call.• Ans Machine/Fax: The printer can share a telephone line with ananswering machine. In this mode, the printer will monitor the faxsignal and pick up the line if there are fax tones. If the phonecommunication is using serial transmission in your country (suchas Germany, Sweden, Denmark, Austria, Belgium, Italy, Franceand Switzerland), this mode is not supported.• DRPD: Before using the Distinctive Ring Pattern Detection(DRPD) option, distinctive ring service must be installed on yourtelephone line by the telephone company. After the telephonecompany has provided a separate number for faxing with adistinctive ring pattern, configure the fax setup to monitor forthat specific ring pattern.Ring Tone VolumeAuto ReceiveSetupAuto Receive FaxSets the volume of the ring tone, which indicates that an incomingcall is a telephone call through the internal speaker whenReceive Mode is set to Telephone / Fax.Sets the interval at which the printer goes into the fax receivemode after receiving an incoming call. The interval can bespecified within the range of 0 to 255 seconds. The default is 0second.Auto ReceiveTel/FaxSets the interval at which the printer goes into the fax receivemode after the external telephone receives an incoming call. Theinterval can be specified within the range of 0 to 255 seconds. Thedefault is 6 seconds.Auto ReceiveAns/FaxSets the interval at which the printer goes into the fax receivemode after the external answering machine receives an incomingcall. The interval can be specified within the range of 0 to 255seconds. The default is 21 seconds.Junk Fax Setup You can reject faxes sent from unwanted stations. The system onlyaccepts faxes from the remote stations registered in the speed dial.This feature is useful for blocking any unwanted faxes.Tap Off to turn the feature off. Anybody can send you a fax.Tap On to turn the feature on.Secure Receive You can specify whether to require a four digit password to receivefaxes, and to set or change the password.Faxing 371
