Fast ScanOn the Chart 1 of the color registration chart, find the straightest lines where the two black lines and the colored lineare most closely aligned for each color (LY, LM, LC, RY, RM, and RC). If you find the straightest line, make a noteof the value (-8 to +8) indicated by the straightest line for each color.When the value is 0 for each color, you do not need to adjust the color registration for the fast scan.When the value is not 0, enter the value using the procedure in "Entering Values."Straightest lineNOTE: If it is difficult to choose only one value, as in the case that there seem to be two values closest to a straight line, take thevalue between the two. For example, in the figure above, -6 and -8 are the values closest to a straight line, so you would enter thevalue -7.Slow ScanOn the Chart 2 of the color registration chart, find the medium line within the range of white area for each colorpattern (PY, PM, and PC). If you find the medium line, make a note of the value (-9 to +9) indicated by themedium line for each color.When the value is 0 for each color, you do not need to adjust the color registration for the slow scan.When the value is not 0, enter the value using the procedure in "Entering Values."Maintaining Your PrinterLattice pattern504
