Option DescriptionTone/Pulse You can select the dialing type.• Tone• Pulse(10PPS)• Pulse(20PPS)Prefix Dial You can specify whether or not to set a prefix dial number. Whenyou set Prefix Dial to On, the number set in PrefixDial Number dials before any auto dial number is started. It isuseful for accessing the Private Automatic Branch Exchange(PBX). You can set a prefix dial number of up to five digits.Fax Cover Page You can set whether to attach a cover page to faxes when sendingfaxes.Fax Header Prints the sender’s information on the header of faxes.Tap Off to turn this feature off.Tap On to turn this feature on.Note that if United States is selected for the setting of Country,this option does not appear on the menu. The setting is fixed toOn and cannot be changed.For information on the country setting, see "Setting YourCountry."ECM You can set whether to enable or disable the ECM (ErrorCorrection Mode).Modem Speed You can set the modem speed.Display ManualFax RecipientsYou can set whether to display the fax number of the recipient onthe Sending Fax screen when manually sending a fax.Fax Reports Fax Activity You can set whether to automatically print a fax activity reportafter every 50 incoming and outgoing fax communications.Fax Transmit You can set whether to print a transmission result after a faxtransmission.Fax Broadcast You can set whether to print a transmission result after a faxtransmission to multiple locations.Fax Protocol You can set whether to print the protocol monitor report after a faxtransmission to monitor fax protocol problems.NOTE: Prefix Dial supports only the environment where you send a fax to the external line number. To use Prefix Dial, you mustdo the following from the operator panel.1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap Fax Settings.4 Tap Fax Line Settings.5 Tap Line Type.6 Tap PBX, and then OK.7 Tap Transmission Defaults.8 Tap Prefix Dial.9 Tap On.Faxing 373
