Trap Notification 1-4 Trap Address Type Select the check boxes to notify trap occurrence. In this case, specify the IPTrap AddressPort NumberNotifyNetwork*2address and IP socket in the following format:IPv4Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmmformat. Each section of "nnn" is a variable value between 0 and 255. Notethat values 127 and 224-254 are not valid for the first three-digits only. IPsocket mmmmm is a variable value between 0 and 65,535.IPv6Specify the IP address and IP socket in thexxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each sectionof "xxxx" is a hexadecimal variable value between 0 and ffff. IP socketmmmmm is a variable value between 0 and 65,535.Authenticate Error Trap Select the check box to notify Authenticate Error Trap.*1 The default value can be changed by using Dell Printer Configuration Web Tool.*2 This item is available only when Wi-Fi Direct is set to Enable.SNMP v3Purpose:To edit the detailed settings of SNMP v3 protocol.To enter this page, click Edit SNMP v3 Properties in the SNMP page.Values:Administrator Account Account Enabled Select the check box to enable the administrator account.User Name Enters the user name of the administrator account.AuthenticationPasswordSets the authentication password of the administrator account using 8 to 32alphanumeric characters.Re-enter AuthenticationPasswordConfirms the set password.Privacy Password Sets the privacy password of the administrator account using 8 to 32alphanumeric characters.Re-enter PrivacyPasswordConfirms the set password.Print Drivers / RemoteClient AccountAccount EnabledReset to defaultPasswordSelect the check box to enable the print drivers and remote client account.Click to reset the password for the print drivers and remote client accountto default.Scan to PCPurpose:To specify the client when scanning data.Values:FTP Client Connection Time-Out Sets the connection time-out period from 1 to 60 seconds.FTP Passive Sets whether to enable the FTP Passive mode.SMB Client Connection Time-Out Sets the connection time-out period from 1 to 60 seconds.Dell™ Printer Configuration Web Tool166
