Adjust Altitude 0 meter1000 metersSets the altitude of the location where theprinter is installed.2000 meters3000 metersApply New Settings After you change the settings, click this buttonto apply the changes.Restart printer to apply new settings Click this button to apply the changes.Tray ManagementPurpose:To specify the paper types and sizes, and the tray priority for the MPF, tray1, and the optional 550-sheet feederrespectively.Values:Tray Settings MPF Display Tray On Displays a popup message that prompts the userPrompt Off to set Paper Type and Paper Size when the paperis loaded in the MPF.MPF Use Driver On Sets whether to use the printer driver settingsSettings for Print Job Off for the size and type of paper loaded in the MPF.MPF Paper Size*1 A4 (210x297mm) Sets the size of paper loaded in the MPF.A5 (148x210mm)B5 (182x257mm)Letter (8.5x11")Folio (8.5x13")Legal (8.5x14")Executive (7.3x10.5")Envelope #10 (4.1x9.5")Monarch Env. (3.9x7.5")DL Env. (110x220mm)C5 Env. (162x229mm)Custom SizeMPF Custom Size -Y*1Available Range:127–355 mm (5.0–14.0 inches)Sets the length of custom size paper loaded inthe MPF.MPF Custom Size -X*1Available Range:77–215 mm (3.0–8.5 inches)Sets the width of custom size paper loaded inthe MPF.MPF Paper Type*1 Plain Sets the type of paper loaded in the MPF.Plain ThickCovers(106–163g/m2)Covers Thick(164–216g/m2)Coated(106–163g/m2)Coated Thick(164–216g/m2)LabelEnvelopeUnderstanding the Tool Box Menus198
