Adjust Fusing UnitNOTE: The print quality changes depending on the setting values you select for this item.Purpose:To adjust the temperature setting of the fusing unit for each paper type.Values:Plain 0* Sets the fusing unit temperature in increments of 1. The defaultPlain ThickAvailable Range: -3 to +30*settings may not give the best output on all paper types. When theprinted paper has curled, try to lower the temperature. When the tonerdoes not fuse on the paper properly, try to increase the temperature.Available Range: -3 to +3Covers 0*(106-163g/m2) Available Range: -3 to +3Covers Thick 0*(164-216g/m2) Available Range: -3 to +3Coated 0*(106-163g/m2) Available Range: -3 to +3Coated Thick 0*(164-216g/m2) Available Range: -3 to +3Label 0*Available Range: -3 to +3Envelope 0*Available Range: -3 to +3Recycled 0*Available Range: -3 to +3Auto Reg AdjustPurpose:To specify whether to automatically perform color registration adjustment.Values:Off Does not automatically perform color registration adjustment .On* Automatically performs color registration adjustment .Color Reg AdjustPurpose:To manually perform color registration adjustment.Manual Color Registration Adjustments are required when the printer is initially installed and after the printer ismoved.NOTE: The Color Reg Adjust feature can be configured when Auto Reg Adjust is set to Off.Values:Auto Correct Start Automatically performs color registration correction.Understanding the Printer Menus 251
