Port SettingsPurpose:To enable or disable printing ports and management protocol features.Values:Ethernet*1 Ethernet Settings Auto Detects the Ethernet transmission rate and theduplex settings automatically.10Base-T Half-Duplex Selects 10Base-T Half-Duplex as the defaultvalue.10Base-T Full-Duplex Selects 10Base-T Full-Duplex as the defaultvalue.100Base-TX Half-Duplex Selects 100Base-TX Half-Duplex as the defaultvalue.100Base-TX Full-Duplex Selects 100Base-TX Full-Duplex as the defaultvalue.1000Base-T Full-Duplex Selects 1000Base-T Full-Duplex as the defaultvalue.Current Ethernet Settings Displays the current settings of the Ethernet.MAC Address Displays the MAC address of the printer.Port Status LPD Sets whether to enable LPD.Port9100 Sets whether to enable Port9100.IPP Sets whether to enable IPP.WSD Print Sets whether to enable WSD Print.Scan to WSD Sets whether to enable Scan to WSD.Network TWAIN Sets whether to enable Network TWAINFTP Sets whether to enable FTP.SMB Sets whether to enable SMB.Bonjour (mDNS) Sets whether to enable Bonjour (mDNS).E-Mail Alert Sets whether to enable E-Mail Alert.Telnet Sets whether to enable Telnet.SNMP Sets whether to enable SNMP.Update Address Book Sets whether to enable Update Address Book.SNTP Sets whether to enable SNTP.Google Cloud Print Sets whether to enable Google Cloud Print.Print from Dell Sets whether to enable Print from Dell Document Hub.Document HubScan to Dell Document Sets whether to enable Scan to Dell Document Hub.Hub*1 This item is available only when the printer is connected using an Ethernet cable.NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure thesettings, click the Apply New Settings button to apply the new settings.Dell™ Printer Configuration Web Tool 159
