Receiving Faxes Using the DRPDThe DRPD is a telephone company service which enables a user to use a single telephone line to answer severaldifferent telephone numbers. The particular number someone uses to call you on is identified by different ringingpatterns, which consist of various combinations of long and short ringing sounds.Before using the Distinctive Ring Pattern Detection option, Distinctive Ring service must be installed on yourtelephone line by the telephone company. To set up Distinctive Ring Pattern Detection, you will need anothertelephone line at your location, or someone available to dial your fax number from outside.To set up the DRPD:1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap Fax Settings.4 Tap Fax Line Settings.5 Tap until DRPD Pattern appears, and then tap DRPD Pattern.6 Tap the desired pattern, and then tap OK.7 Turn off the printer, and turn it on again to apply the settings.To receive faxes in the DRPD, you need to set the menu to DRPD. For details, see "Available Fax SettingsOptions."Your printer provides seven DRPD patterns. If this service is available from your telephone company, ask yourtelephone company which pattern you need to select to use this service.Receiving Faxes in the MemorySince your printer is a multi-tasking device, it can receive faxes while you are making copies or printing. If youreceive a fax while you are copying, printing, or run out of paper or toner, your printer stores incoming faxes in thememory. Then, as soon as you finish copying, printing, or re-supply the consumables, the printer automatically printsthe fax.Polling ReceiveYou can receive faxes from the remote fax machine when you want to receive it.1 Press the (Home) button.2 Tap Fax.3 Tap On Hook.4 Tap Polling.5 Enter the fax number of the remote machine using the number pad.6 Tap Receive to begin receiving the fax.Automatic DialingSpeed DialingYou can store up to 200 frequently dialed numbers in speed dial locations (001–200).When the speed dial job specified in the delayed fax or redial exists, you cannot change the speed dial number fromthe operator panel or Dell Printer Configuration Web Tool.Faxing386
