Configuring the Optional Wireless AdapterThis section describes how to configure a wireless adapter.You can select a method to configure a wireless adapter from the following:Wizard Setup through USB Cable(recommended)WPS-PBC*1*3WPS-PIN *2*3Advanced Setup through Operator PanelEthernet CableDell Printer Configuration Web Tool*1 WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wirelessconfiguration, by pressing the button provided on the access point via wireless routers, and then performing WPS-PBC setting on theoperator panel. This setting is available only when the access point supports WPS.*2 WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wireless configuration, by entering PIN assignments in the printer and computer. This setting, performed through access point, is availableonly when the access points of your wireless router supports WPS.*3 WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK AES, WPA2PSK AES, WPA-PSK TKIP, Open (No Security)NOTE: The optional wireless adapter must be installed on the printer. For information on how to install a wireless adapter, see"Installing the Optional Wireless Adapter."NOTE: If the Panel Lock Control is set to Enable, you need to enter the four digit password to enter the AdminSettings menu.NOTE: For details about using WPA-Enterprise-AES, WPA2-Enterprise-AES, or WPA-Enterprise-TKIP, see "Using DigitalCertificates."Configuring the Wireless Adapter Using Dell Printer Setup1 Insert theSoftware and Documentation disc provided with the printer on your computer. The Dell Printer Setupprogram launches automatically.2 Click Setup.Click Wireless.Follow the on-screen instructions, and configure the wireless setting of the printer.For WPS-PIN, WPS-PBC, Operator Panel, and Dell Printer Configuration Web Tool, see the followinginstructions.Installing Optional Accessories 533
