1Turning on the PrinterWARNING: Do not use extension cords or power strips.WARNING: The printer should not be connected to an Uninterruptible Power Supply (UPS) system.NOTE: The Software and Documentation disc also contains video instructions. On Dell Printer Setup, click Installation Video.Connect the power cable to the power connector on the rear of the printer, and then to a power source.2 Turn on the printer. When the printer is connected via a USB cable, the USB driver is automatically installed.Setting Initial Settings on the Operator PanelYou need to set the printer language, country, clock date, time, and fax settings when you turn on printer for the firsttime.When you turn the printer on, the wizard screen to perform the initial setup appears on the touch panel. Follow thesteps below to set the initial settings.NOTE: If you do not start configuring the initial settings, the printer automatically restarts in three minutes, and the Home screenappears on the touch panel. After that, you can set the following initial setup by enabling Power on Wizard on the touchpanel or Dell Printer Configuration Web Tool if needed.For more information on operator panel, see "Operator Panel."For more information on Dell Printer Configuration Web Tool, see "Dell™ Printer Configuration Web Tool."1 The Select Your Language screen appears.a Tap until desired language appears, and then tap the desired language.EnglishFrançaisItalianoDeutschEspañolDanskNederlandsConnecting Your Printer 63
