Printer MaintenanceThe Printer Maintenance tab includes the System Settings - General, System Settings - Timers, System Settings -Output Settings, Service Tools, Tray Management, Panel Language, TCP/IP Settings, Network Settings, CopyDefaults, Scan Defaults, Fax Defaults, USB Direct Print Defaults, and Fax Settings pages.System Settings - GeneralPurpose:To configure the power management of the printer, date and time, mm/inch setting, alarm tones, job log auto print,and setting of the additional memory.Values:Power Saver Timer Sleep*1Deep Sleep*1Available Range:1–30 minutesAvailable Range:1–30 minutesSets the amount of transition time to the Sleep modeafter the printer finishes a job.Sets the amount of transition time between the Sleepmode and the Deep Sleep mode.Date & Time Time ZoneSettingsClick to display the Time Zone Settings dialog box. Selectthe geographic region and time zone, and then click OK.Time Zone Displays the time zone selected on the Time ZoneSettings dialog box.Set Date Sets the date.Date Format Sets the date format.Set Time Sets the time. You can select AM or PM when TimeFormat is set to 12 Hour.Time Format Sets the time format in 24 Hour or 12 Hour.mm / inch Millimeters(mm)Inches(")Selects millimeter or inch as the default measurementunit.Audio Tone Control PanelToneOff Does not emit a tone when the operator panel input iscorrect.SoftNormalEmits a tone at the specified volume when the operatorpanel input is correct.LoudInvalid Key Tone Off Does not emit a tone when the operator panel input isincorrect.SoftNormalEmits a tone at the specified volume when the operatorpanel input is incorrect.LoudMachine ReadyToneOff Does not emit a tone when the printer becomes ready.Soft Emits a tone at the specified volume when the printerbecomes ready.NormalLoudUnderstanding the Tool Box Menus 193
