Operator PanelAuto SSID Setup1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap Network.4 Tap Wireless.5 Tap Wireless Setup Wizard.The printer automatically searches the access points on wireless network.6 Tap until the desired access point appears, and then select the access point.If the desired access point does not appear, go to "Manual SSID Setup."NOTE: Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.7 Tap Next.8 Enter the WEP key or pass phrase.When the encryption type of the selected access point is WEP in step 6:a Tap the WEP Key text box, and then enter the WEP key.b Tap OK.When the encryption type of the selected access point is WPA, WPA2 or Mixed in step 6:a Tap the Pass Phrase text box, and then enter the pass phrase.b Tap OK.9 The Restart System screen appears.10 Turn off the printer, and turn it on again to apply the settings.Wireless LAN connection setting is complete.Manual SSID Setup1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap Network.4 Tap Wireless.5 Tap Wireless Setup Wizard.6 Tap the Manual SSID Setup check box, and then tap Next.7 Enter the SSID, and then tap Next.8 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then tapNext.If you select Infrastructure, proceed to step 9.If you select Ad-hoc, proceed to step 10.Installing Optional Accessories 55
