Delta ASDA-B2-F Series User Manual

Contents

Parameters ASDA-B2-F7-14 September, 20157P0-21 CM5A Status Monitor Register 5 Selection Address: 002AH002BHOperationalInterface: Panel / Software Communication RelatedSection: -Default: 0 ControlMode: -Unit: - Range: 0 ~ 127Format: DEC Data Size: 16-bitSettings:Please refer to the description of P0-02 for the setting value.P0-22~P0-24 ReservedP0-25 MAP1 Mapping Parameter# 1 Address: 0032H0033HOperationalInterface: Panel / Software Communication RelatedSection: 4.3.5Default: No need to initialize ControlMode: ALLUnit: - Range: Determined by the correspondingparameter of P0-35Format: HEX Data Size: 32-bitSettings:Users can continuously read and write parameters that are not in the same group. The content ofthe parameter that is specified by P0-35 will be shown in P0-25. Please refer to the description ofP0-35 for parameter setting.P0-26 MAP2 Mapping Parameter# 2 Address: 0034H0035HOperationalInterface: Panel / Software Communication RelatedSection: 4.3.5Default: No need to initialize ControlMode: ALLUnit: - Range: Determined by the correspondingparameter of P0-36Format: HEX Data Size: 32-bitSettings:The using method is the same as P0-25. The mapping target is set by parameter P0-36.P0-27 MAP3 Mapping Parameter# 3 Address: 0036H0037HOperationalInterface: Panel / Software Communication RelatedSection: 4.3.5Default: No need to initialize ControlMode: ALLUnit: - Range: Determined by the correspondingparameter of P0-37Format: HEX Data Size: 32-bitSettings:The using method is the same as P0-25. The mapping target is set by parameter P0-37.P0-28 MAP4 Mapping Parameter# 4 Address: 0038H0039HOperationalInterface: Panel / Software Communication RelatedSection: 4.3.5Default: No need to initialize ControlMode: ALLUnit: - Range: Determined by the correspondingparameter of P0-38Format: HEX Data Size: 32-bitSettings:The using method is the same as P0-25. The mapping target is set by parameter P0-38.