Delta ASDA-B2-F Series User Manual

Contents

Parameters ASDA-B2-F7-16 September, 20157P0-35:Mapping parameter: P0-35; Mapping content: P0-25When PH≠PL, it means the content of P0-25 includes two 16-bit parameters.VH=*(PH), VL=*(PL)Mapping parameter: P0-35; Mapping content: P0-25When PH=PL=P, it means the content of P0-25 includes one 32-bit parameter.V32=*(P) If P=060Ah (P6-10), then V32 is P6-10.The setting format of PH, PL is:A: parameter indexing (hexadecimal)B: parameter group (hexadecimal)For example:If the mapping target is P2-06, set P0-35 to 0206.If the mapping target is P5-42, set P0-35 to 052A.For example:If users desire to read / write P1-44 (32-bit) through P0-25, set P0-35 to 0x012C012C via panel orcommunication. Then, when reading / writing P0-25, it also reads / writes P1-44.Moreover, users can also access the value of P2-02 and P2-04 through P0-25.P2-02 Position feed forward gain (16-bit)P2-04 Speed control gain (16-bit)Users only need to set P0-35 to 0x02040202. Then, when reading / writing P0-25, it also reads /writes the value of P2-02 and P2-04.P0-36 MAP2A Target Setting of Mapping Parameter P0-26 Address: 0048H0049HOperationalInterface: Panel / Software Communication RelatedSection: 4.3.5Default: 0 ControlMode: ALLUnit: - Range: Determined by the communicationaddress of the parameter groupFormat: HEX Data Size: 32-bitSettings:P0-37 MAP3A Target Setting of Mapping Parameter P0-27 Address: 004AH004BHOperationalInterface: Panel / Software Communication RelatedSection:4.3.5Default: 0 ControlMode: ALLUnit: - Range: Determined by the communicationaddress of the parameter groupFormat: HEX Data Size: 32-bitSettings: