Delta ASDA-B2-F Series User Manual

Contents

ASDA-B2-F InstallationSeptember, 2015 2-522.5 Specification of Circuit Breaker and FuseCaution: Please use the fuse and circuit breaker that is recognized by UL/CSA.Servo Drive Model Circuit Breaker Fuse (Class T)Operation Mode General GeneralASD-B2-0121-F 5A 5AASD-B2-0221-F 5A 6AASD-B2-0421-F 10A 10AASD-B2-0721-F 10A 20AASD-B2-1021-F 15A 25AASD-B2-1521-F 20A 40AASD-B2-2023-F 30A 50AASD-B2-3023-F 30A 70ANote：If the servo drive equips with earth leakage circuit breaker for avoiding electric leakage, please choose thecurrent sensitivity which is over 200 mA and can continue up to 0.1 seconds.2.6 EMI Filter SelectionItem Power Servo Drive Model Recommended EMI Filter Foot Print1PH 3PH1 100 W ASD-B2-0121-F RF007S21AA RF022M43AA N2 200 W ASD-B2-0221-F RF007S21AA RF022M43AA N3 400 W ASD-B2-0421-F RF007S21AA RF022M43AA N4 750 W ASD-B2-0721-F RF007S21AA RF022M43AA N5 1000 W ASD-B2-1021-F RF015B21AA RF075M43BA N6 1500 W ASD-B2-1521-F RF015B21AA RF075M43BA N7 2000 W ASD-B2-2023-F - RF037B43BA N8 3000 W ASD-B2-3023-F - RF037B43BA NEMI Filter InstallationAll electronic equipment (including servo drive) generates high or low frequency noise duringoperation and interfere the peripheral equipment via conduction or radiation. With EMI Filter andthe correct installation, much interference can be eliminated. It is suggested to use Delta’s EMIFilter to suppress the interference better.When installing servo drive and EMI Filter, please follow the instructions of the user manual andmake sure it meets the following specifications.1. EN61000-6-4 (2001)2. EN61800-3 (2004) PDS of category C23. EN55011+A2 (2007) Class A Group 1