Delta ASDA-B2-F Series User Manual

Contents

ASDA-B2-F ParametersSeptember, 2015 7-457P2-35 PDEV Condition of Excessive Position ControlDeviation WarningAddress: 0246H0247HOperationalInterface: Panel / Software Communication RelatedSection: -Default: 3840000 ControlMode: DMCNETUnit: Pulse Range: 1 ~ 128000000Format: DEC Data Size: 32-bitSettings:It is the setting of excessive position control deviation warning in servo drive error display (P0-01).P2-36~P2-42 ReservedP2-43 NCF2 Resonance Suppression (Notch Filter) (2) Address: 0256H0257HOperationalInterface: Panel / Software Communication RelatedSection: 6.3.6Default: 1000 ControlMode: ALLUnit: Hz Range: 50 ~ 2000Format: DEC Data Size: 16-bitSettings:The second setting value of resonance frequency. If P2-44 is set to 0, this function is disabled.P2-23 and P2-24 are the first group of notch filter.P2-44 DPH2 Resonance Suppression (Notch Filter)Attenuation Rate (2)Address: 0258H0259HOperationalInterface: Panel / Software Communication RelatedSection: 6.3.6Default: 0 ControlMode: ALLUnit: -dB Range: 0 ~ 32 (0: Disable the function ofnotch filter)Format: DEC Data Size: 16-bitSettings:The second resonance suppression (notch filter) attenuation rate. When this parameter is set to 0,the function of notch filter is disabled.Note:If the value of attenuation rate is set to 5, then, it would be -5 dB.P2-45 NCF3 Resonance Suppression (Notch Filter) (3) Address: 025AH025BHOperationalInterface: Panel / Software Communication RelatedSection: 6.3.6Default: 1000 ControlMode: ALLUnit: Hz Range: 50 ~ 2000Format: DEC Data Size: 16-bitSettings:The third setting value of resonance frequency. If P2-46 is set to 0, this function is disabled. P2-23and P2-24 are the first group of notch filter.P2-46 DPH3 Resonance Suppression (Notch Filter)Attenuation Rate (3)Address: 025CH025DHOperationalInterface: Panel / Software Communication RelatedSection: 6.3.6Default: 0 ControlMode: ALLUnit: -dB Range: 0 ~ 32Format: DEC Data Size: 16-bitSettings:The third resonance suppression (notch filter) attenuation rate. When this parameter is set to 0, thefunction of notch filter is disabled. If the value of attenuation rate is set to 5, then, it would be -5 dB.